产品中心 PRODUCT CENTER
Deep groove ball bearing
① With low friction torque, optimized by low vibration and low noise, and suitable for high-speed operation.
② Simple structure, standardized processing technology, reliable and durable, and cost-effective.
③ Being able to carry axial loads in both radial direction and axial direction, easy to install, low maintenance cost.
LEARN MORE Deep groove ball bearing
Self-aligning ball bearing
① Having the ability of self-aligning, being able to bear not only the dynamic misalignment caused by shaft deflection, but also the static misalignment caused due to machining or installation.
② With low friction torque, low noise and low vibration, and low temperature rise even under high-speed working conditions.
③ Low requirement for the minimum load.
LEARN MORE Self-aligning ball bearing
Angular contact ball bearing
① Higher bearing capacity
② It can carry radial and axial combined loads, and through the combination of multiple sets of single-row bearings or double-row bearings, can also carry bidirectional axial loads.
③ The combination of multiple sets of single-row bearings and double-row bearings has a higher rigidity.
④ These high-precision products ensure the high speed and good operating performance of bearings.
LEARN MORE Angular contact ball bearing
Needle bearing
① With a small radial section, it is suitable for very small installation space of bearing and bearing pedestal.
② The optimized needle roller and raceway shape design can provide higher radial loading capacity.
③ High-precision needle roller bearing can have a high operating precision.
LEARN MORE Needle bearing
Cylindrical roller bearing
① Good rigidity and high radial load bearing capacity
② The non-positioning structure can move axially to some extent.
③ The optimized generatrix profile of the roller decreases the edge stress of the contact part between the roller and the raceway, and also reduces the impact of installation alignment and shaft deflection on the overall performance, thus prolonging the service life.
LEARN MORE Cylindrical roller bearing
Self-aligning roller bearing
① With self-aligning function, it can bear not only the dynamic misalignment caused by shaft deflection, but also the static misalignment caused due to machining or installation.
② It has a high radial bearing capacity and some axial bearing capacity.
③ Optimized internal structure design, roller shape and cage structure make the bearing have a long service life.
LEARN MORE Self-aligning roller bearing
Tapered roller bearing
① Being able to bear combined axial and radial loads
② Low friction, noise and vibration, and long service life
③ The products assembled can meet the requirements for the most suitable preloading and rigidity.
④ Parts are detachable and interchangeable, which are more convenient for installation, disassembly and maintenance.
LEARN MORE Tapered roller bearing
Thrust ball bearing
① It can bear axial load.
② Components are detachable and this is convenient for installation, disassembly and maintenance.
③ Products with ball seat rings can adapt to the impact of misalignment.
LEARN MORE Thrust ball bearing
Thrust roller bearing
① Based on the optimized cage design, it can reliably fix and guide more needle rollers and provide high bearing capacity.
② It can provide very high rigidity in a very small axial space.
③ The optimized needle roller and raceway shape design can reduce the edge contact stress, thus having a longer service life.
LEARN MORE Thrust roller bearing
Roller bearing
① High radial bearing capacity
② Products with axial positioning can bear some axial load.
③ Being able to bear the unbalance loading and skew operation caused due to slight misalignment
④ The optimized outer surface profile can reduce the contact stress with the guide rail and improve the service life of the guide rail.
⑤ The optimized raceway and roller shape can ensure the long service life of the bearing.
LEARN MORE Roller bearing
Turntable bearing
① Unit structure, compact host structure, optimized power transmission
② It is easy and convenient to connect and install adjacent machine parts.
③ Strong bearing capacity and being able to bear all kinds of combined loads
LEARN MORE Turntable bearing
Cross roller bearing
① It can bear axial force in both directions, radial force, upsetting moment and combined loads.
② Apply for high rigidity case
③ Run with high precision and is able to offer preload
LEARN MORE Cross roller bearing
Bearing seat (mounted bearing)
① It can bear combined axial and radial loads
② It has compact structure
③ The spherical seat hole is a little helpful for the centring of long shaft
④ Large mounted bearings may be structured with split type for convenient installation and maintenance
LEARN MORE Bearing seat (mounted bearing)
Sliding bearing
① It has large load and bearing capacity, and can bear combined axial and radial loads
② It, as surface contact bearing is suitable for high speed and light load condition
③ It can realize smooth, reliable and noiseless operation
LEARN MORE Sliding bearing
ABOUT US
About Us

COMPANY PROFILE

Established in 2014, KIS Bearing Technology (Asia Pacific) CO., LTD. is an Asia-Pacific joint venture subsidiary of KIS Bearing Technology CO., LTD in Germany. The Company focuses on selling German-quality bearings, and provides customers in the application industry with a complete set of technological and high-quality bearing services. Our business covers Chinese mainland and other Asia-Pacific regions; Our products are used in construction machinery, port, mine, metallurgy, shipping, logistics, beverages, plastics, chemical industry and other fields.

Hans-Georg Kohlhaas, the founder, always upholds the craftsman spirit, strictly follows Deutsche Industrie Norm (DIN), and focuses on continuous research and development and innovation of products. With more than 30 years of hard work, the Company has finally been trusted and supported by users all over the world.

DEVELOPMENT HISTORY

In 1988 KIS Bearing first appeared in Dortmund, Germany
1988
1988
In 1996 The Company was first certificated with ISO
1996
1996
In 2000 The Company expanded and cooperated with well-known European enterprises
2000
2000
In 2006 The Company began to focus on the Chinese market and made preparations
2006
2006
In 2010 The Company began to authorize product agents to expand business globally
2010
2010
In 2014 KIS Bearing Technology (Asia Pacific) CO., LTD. was established in
2014
2014
In 2019 The new building of the German headquarters was completed and put into use
2019
2019
1988
1996
2000
2006
2010
2014
2019